Updated: 15 November 2026. Emergency lighting should have a short function test every month and a full-duration test once a year, with every test written in a log. That is the routine set out in the British Standard for emergency lighting, BS 5266-1, and it is what a fire risk assessor or council officer will expect to see.
How often should emergency lighting be tested?
| Test | How often | What happens |
|---|---|---|
| Function test | Monthly | The mains supply to each light is switched off briefly to confirm that it comes on from its battery. |
| Full-duration test | Annually | Each light runs on its battery for its full rated time, commonly three hours, to confirm that the battery still lasts. |
| Visual check | At each test | Lights are checked for damage, dirt, obstruction and a working charge indicator. |
After the full-duration test the batteries need time to recharge, so it should be done when the building is at its lowest risk.
Where is emergency lighting needed?
Emergency lighting is fitted where people would not be able to find their way out safely if the normal lighting failed. The fire risk assessment decides where it is needed. Typical places are:
- Shared stairs, landings and corridors in blocks of flats
- Escape routes in HMOs, especially larger ones and those with no natural or street light on the stairs
- Offices, shops, restaurants and other business premises
- Final exits, changes of level and changes of direction on the escape route
HMO landlords can read emergency lighting in HMOs: when it is required.
What is an emergency lighting certificate?
After the annual test, the person who carried it out records the result for each light and issues a periodic inspection and test certificate. Landlords, managing agents and businesses keep it with the fire safety records. Councils often ask for it with an HMO licence application.
Who can test emergency lighting?
The monthly function test is simple and is often done by the landlord, the managing agent or a member of staff using the test key switch. The annual full-duration test and any repairs should be done by a competent person, usually an electrician or a fire safety contractor.
What to record
- The date of each test and who carried it out
- Which lights were tested
- Any light that failed, and when it was repaired
- The date and result of the annual full-duration test
A missing log is one of the most common findings in a fire risk assessment. See our fire risk assessment service in London.
Frequently asked questions
How often should emergency lighting be tested?
A short function test every month and a full-duration test every year.
How long should emergency lights stay on?
For their rated duration, which is commonly three hours. The annual test confirms that the batteries still last that long.
Is emergency lighting a legal requirement?
The responsible person must provide emergency lighting where it is needed for people to escape safely. The fire risk assessment identifies where that applies.
Does a rented house need emergency lighting?
A single-household let does not normally need it. HMOs and buildings with shared escape routes may, depending on the fire risk assessment and the council’s licence conditions.
Arrange a fire risk assessment
Use Get a Quote or call 07506 892739. Related guide: fire alarm testing in HMOs.
This article provides general information for England and is not legal advice.
